antipanic
Anti-panic optics for optimal illumination of rooms and prevention of panic. Nearly square light distribution enables extremely simple lighting design.
- Protection class I
- Luminaire pre-wired using halogen-free leads
- Polycarbonate lens
- Optimum thermal management via heat sink
- LED emergency luminaire for emergency lighting in accordance with EN 1838, UNI EN 50172 and NFPA 101
- Discreet, elegant design with rotatable LED head directly in the rail
- IP65 protection rating (in installed state)
- TRINOS module
- Roll-formed sheet steel with white polyester coating, colour similar to RAL 9016
- Tool-free connection to TRINOS continuous row system
- Tool-free battery replacement
- 2 high power LEDs, neutral white 4,000 K
- Variants for escape route lighting: escape HC
Variants for anti-panic lighting: antipanic, antipanic HC
Variants for building lighting: spot
- NFC interface for address-setting, configuration and maintenance via PROset Pen (article no.: 22170290) or PROset App
- Non-maintained and maintained mode settable via jumper and NFC interface
- Light level in mains operation settable from 15% to 100%
- E1D, E3D and E8D: Luminaire with local battery supply for 1, 3 or 8 hour emergency lighting in maintained or non-maintained mode, with automatic test (auto-test) via the luminaire, optional central monitoring via DALI
- Display of luminaire status via status LED
- Installed loads:
E1D = 4.7 W, HC E1D = 6.7 W, HP E1D = 8.2 W
E3D = 4.7 W, HC E3D = 7.1 W, HP E3D = 8.2 W
E8D = 5.5 W
ECC = 3.8 W, HC ECC = 4.4 W, HP ECC = 7.2 W
ECD = 3.9 W, HC ECD = 4.5 W, HP ECD = 7.2 W
ECP = 3.8 W, HC ECP = 4.5 W, HP ECP = 7.5 W
- E1D, E3D and E8D mains connection: 220-240 V AC, 50/60 Hz