Filter

Reset all
  1. RESCLITE PRO mounting accessories
RESCLITE PRO

escape

Escape optics for optimal illumination of escape routes. Elongated light distribution enables extremely large luminaire distances and thus reduces acquisition, installation and maintenance costs.
  • Protection class I
  • Protection type IP40
  • Luminaire pre-wired using halogen-free leads
  • Polycarbonate lens
  • Optimum thermal management via heat sink
  • Strain relief at both ends (mains connection and cable to LED module)
  • LED emergency luminaire for emergency lighting in accordance with EN 1838, UNI EN 50172 and NFPA 101
  • Flat, discreet and elegant design: the mini LED unit practically disappears into the ceiling
  • Trim of diecast aluminium, powder-coated white similar to RAL 9016; gearbox for installation in ceiling recess made of polypropylene (PP)
  • Tool-free rapid mounting of the luminaire via specially shaped spring clips
  • Tool-free battery replacement
  • 2 high power LEDs, neutral white 4,000 K
  • Variants for escape route lighting: escape, escape HP, escape 90°, escape 90° HP Variants for anti-panic lighting: antipanic, antipanic HP Variants for building lighting: spot, spot HP
  • NFC interface for address-setting, configuration and maintenance via PROset Pen (article no.: 22170290) or PROset App
  • Non-maintained and maintained mode settable via jumper and NFC interface
  • Light level in mains operation settable from 15% to 100%
  • E1D, E3D and E8D: Luminaire with local battery supply for 1, 3 or 8 hour emergency lighting in maintained or non-maintained mode, with automatic test (auto-test) via the luminaire, optional central monitoring via DALI
  • Display of luminaire status via status LED
  • Installed loads: E1D = 4.7 W, HC E1D = 6.7 W, HP E1D = 8.2 W E3D = 4.7 W, HC E3D = 7.1 W, HP E3D = 8.2 W E8D = 5.5 W ECC = 3.8 W, HC ECC = 4.4 W, HP ECC = 7.2 W ECD = 3.9 W, HC ECD = 4.5 W, HP ECD = 7.2 W ECP = 3.8 W, HC ECP = 4.5 W, HP ECP = 7.5 W
  • E1D, E3D and E8D mains connection: 220-240 V AC, 50/60 Hz
  • No through-wiring (wiring directly on the control unit)
  • Ceiling recessed luminaire for 40 mm ceiling cutout and ceiling thicknesses of 1 - 25 mm
ConfigureAccessories

Choose a product

22 Results
Filter