1. Axyl Gild, klein 2 Fenster

PERLUCE LED square opal

PERLUCE O LED5200-830 Q620 EVG IP54 WH
Article number: 42182938
EAN number: 9008709707245
diff. lum. with opal diffuser 42.4W 5230lm 3,000 K white
Luminous flux
5230 lm
Correlated colour temperature
3000 K
Colour
White
See other variants
ConfigureFind Spare Parts

Technical Data

Electrical Properties
EEC
D
Luminaire input power
42.4 W
Power factor
0.97
Standby Power
0 W
Rated voltage
220 - 240 V
Total harmonic distortion (THD)
12.4 percent
Ballast
Ballast 1: 1 x 28000713 LC 75W 100-400mA flexC lp EXC
Safety Class
SC1
Emergency included
No
Light Distribution
Light Source
LED
Luminous flux
5230 lm
Luminaire efficacy
123 lm/W
Correlated colour temperature
3000 K
Chromaticity tolerance (initial MacAdam)
3
Colour Rendering Index min.
80
Light Distribution
STD - standard
Physical Characteristics
Dimensions
620x620x90 mm
Mounting type
Surface mounted
Length
620 mm
Width
620 mm
Height
90 mm
Weight
7.22 kg
Colour
White
Impact strength
IK03
Degree of protection
IP54
Maintenance and Protection
Rated useful life (B10)
L90 50000 h 25 °C
Maintenance category CIE 97
E - Dust-proof IP5X
Norms and Standards
Certificates
GLedReP
LLedReP
EAC
RCM
CE
Electrical class I
IK03
Halogenfree
D
IP54
BEG
Minergie
Drawings
Light Distribution
Dimensional sketch

Downloads

PERLUCE LED square opal

42182938 PERLUCE O LED5200-830 Q620 EVG IP54 WH Square LED surface-mount luminaire with IP54 with opal diffuser., with LED converter. LED service life lasts 50000 h before luminous flux is reduced to 90% of the initial value. Chromaticity tolerance (initial MacAdam): 3. Luminaire luminous flux: 5230 lm, Luminaire efficacy: 123 lm/W. Colour rendering Ra > 80, colour temperature 3000 K. Despite maximum quality control, recognisable colour differences between luminaires with the predefined tight binning may occur with cluster applications. To achieve a uniform appearance despite this, we recommend consulting a lighting consultant with intended cluster installations. Integrated ESD protection of the LED module. Housing made of pre-painted, roll-formed sheet steel, white, with injection-moulded diffuser made of opal polymethylmethacrylate. Edges sealed by high-quality foamed, water-repellent polyurethane seal; special cable guide for IP54. Installed using slotted washers supplied. Luminaire can be used as an emergency luminaire in centrally supplied emergency light systems. Approved ambient temperature: -20°C to +25°C. Luminaire wired with halogen-free leads. Please note: please talk to your adviser if you are planning to use the luminaire in environments containing chemical pollutants or with outdoor use. Dimensions: 620 x 620 x 90 mm; weight: 7.5 kg.
Copy text