1. PERLUCE LED linéaire, LRO/opale

PERLUCE LED square opal

PERLUCE O LED2200-830 Q310 EVG IP50 WH
Article number: 42182857
EAN number: 9008709706019
diff. lum. with opal diffuser 18.1W 2140lm 3,000 K white
Luminous flux
2140 lm
Correlated colour temperature
3000 K
Colour
White
See other variants
ConfigureFind Spare Parts

Technical Data

Electrical Properties
EEC
D
Luminaire input power
18.1 W
Power factor
0.91
Standby Power
0 W
Rated voltage
220 - 240 V
Ballast
Ballast 1: 1 x 28000679 LC 25W 100-500mA flexC lp EXC
Safety Class
SC1
Emergency included
No
Light Distribution
Light Source
LED
Luminous flux
2140 lm
Luminaire efficacy
118 lm/W
Correlated colour temperature
3000 K
Chromaticity tolerance (initial MacAdam)
3
Colour Rendering Index min.
80
Light Distribution
STD - standard
Physical Characteristics
Dimensions
310x310x90 mm
Mounting type
Surface mounted
Length
310 mm
Width
310 mm
Height
90 mm
Weight
2.5 kg
Colour
White
Impact strength
IK03
Degree of protection
IP50
Maintenance and Protection
Rated useful life (B10)
L90 50000 h 25 °C
Maintenance category CIE 97
E - Dust-proof IP5X
Norms and Standards
Certificates
GLedReP
LLedReP
EAC
RCM
CE
Electrical class I
IK03
Halogenfree
D
IP50
BEG
Minergie
Drawings
Light Distribution
Dimensional sketch

Downloads

PERLUCE LED square opal

42182857 PERLUCE O LED2200-830 Q310 EVG IP50 WH Square LED surface-mount luminaire with IP50 with opal diffuser. , with LED converter. LED service life lasts 50000 h before luminous flux is reduced to 90% of the initial value. Chromaticity tolerance (initial MacAdam): 3. Luminaire luminous flux: 2140 lm, Luminaire efficacy: 118 lm/W. Colour rendering Ra > 80, colour temperature 3000 K. Despite maximum quality control, recognisable colour differences between luminaires with the predefined tight binning may occur with cluster applications. To achieve a uniform appearance despite this, we recommend consulting a lighting consultant with intended cluster installations. Integrated ESD protection of the LED module. Housing made of plastic, white, with injection-moulded diffuser made of opal polymethylmethacrylate. Edges sealed by high-quality foamed, water-repellent polyurethane seal; installed using slotted washers supplied. Approved ambient temperature: -20°C to +25°C. Luminaire wired with halogen-free leads. Please note: please talk to your adviser if you are planning to use the luminaire in environments containing chemical pollutants or with outdoor use. Dimensions: 310 x 310 x 90 mm; weight: 1.9 kg.
Copy text